Manufacture Single Phase Capacitor for Start And Run Motors

Product Details

Range:

0.37 to 1.5 KW

Frame :

IEC 90S to 112M

Poles :

2, 4 & 6

Mounting :

Foot (B3), Flange (B5), Face (B14) and combinations

Protection :

IP 55

Insulation :

0.09 to 30 KW

Voltage :

415 V, 380 V, 220 V or as per requirement

Frequency :

50 Hz/ 60 Hz or as per requirement

Duty :

Enclosure :

TEFC

Ambient Temperature:

50°C

Temperature rise:

Class ‘B’ (80ºC)

Bearings :

SKF Double Sealed Ball Bearings

Service Factor :

1 to 1.15

Housing Body :

Cast Iron

Fill This Form to Connect

Manufacture Single Phase Capacitor for Start And Run Motors

Capacitor Start & Run (CSCR) Motors are combination of both PSC and CSIR motors. Every CSCR motor has a start-type capacitor in series with the auxiliary winding like the capacitor-start motor for high starting torque. And, like a PSC motor, it also has a run-type capacitor that is in series with the auxiliary winding after the start capacitor is switched out of the circuit. This allows high breakdown or overload torque.

Advantage of Amber CSCR motor is that it is such designed that it consumes lower full-load current and gives higher efficiency. CSCR motor is a real power house which are able to handle applications too demanding for any other kind of single-phase motor which include woodworking machinery, air compressors, high-pressure water pumps, vacuum pumps and other high torque applications.

Product Specification

The primary goals of the Total Quality Management (TQM) project are to enhance product quality, reduce defects, and foster a culture of continuous improvement.

Cast Iron Enclosure

Insulation : F Class
Voltage :230 V, 110 V or as per requirement
Frequency :50 Hz/ 60 Hz or as per requirement
Duty :S1
Enclosure :TENV,TEFC & DPFC
Ambient Temperature:50°C
Temperature rise:Class ‘B’ (80ºC)
Bearings :SKF Double Sealed Ball Bearings
Standard :IS 996

Aluminium Enclosure

Range : 0.09 to 0.37 KW
Frame : IEC 63 to 90L
Poles : 2, 4 & 6
Mounting : Foot (B3), Flange (B5), Face (B14) and combinations
protection : IP 55
Insulation : F Class
Voltage :415 V, 380 V, 220 V or as per requirement
Frequency :50 Hz/ 60 Hz or as per requirement
Enclosure :TENV,TEFC & DPFC
Ambient Temperature:50°C
Temperature rise:Class ‘B’ (80ºC)
Bearings :SKF Double Sealed Ball Bearings
Standard :1 to 1.05

The problem

The project addresses inconsistencies in product quality, inefficiencies in production processes.