0.09 to 30 KW
IEC 63 to 200L
2, 4, 6 & 8
Foot (B3), Flange (B5), Face (B14) and combinations
IP 54
0.09 to 30 KW
415 V, 380 V, 220 V or as per requirement
50 Hz/ 60 Hz or as per requirement
S1
TEFC
50°C
Class ‘B’ (80ºC)
SKF Double Sealed Ball Bearings
1 to 1.15
Cast Iron
Got questions or need assistance with your Industry needs?
Three phase DC Brake motors offered by Amber consist of DC Electromagnetic Fail Safe OR Normally off Brake Unit mounted on the non-drive end of the motor and coupled directly to the shaft of the motor. The brake unit being DC wound is powered through a rectifier or bridge. The brake in DC Fail Safe brake motors will apply whenever the power to the brake via rectifier or bridge is cut off and vice versa in the Normally off brake units.
These motors are availed with or without cooling fan based on the application and requirement. Application of DC Three phase brake motors are in machine tools and other applications where the frequency of switching the brake On-Off is very high. The major care to take while operating DC Fail Safe Brake motors is to check that power to motor and brake are cut off simultaneously otherwise the motor or brake may get damaged.
The primary goals of the Total Quality Management (TQM) project are to enhance product quality, reduce defects, and foster a culture of continuous improvement.
The project addresses inconsistencies in product quality, inefficiencies in production processes.
The project implements Total Quality Management solutions to improve product quality.
We implement rigorous quality control measures at every stage of production, ensuring consistency and high standards.
We implement rigorous quality control measures at every stage of production, ensuring consistency and high standards.
We implement rigorous quality control measures at every stage of production, ensuring consistency and high standards.
We implement rigorous quality control measures at every stage of production, ensuring consistency and high standards.
We implement rigorous quality control measures at every stage of production, ensuring consistency and high standards.
Join us to experience cutting-edge industrial solutions that drive innovation, lasting success.
We are in electrical field since 1938. In beginning stage we were attending work of electric fittings and we started our retail shop in 1984. Second shop was started in 1967 and after 6 years, i.e. in the year of 1973 we established factory of manufacturing just 5 motors per month, which is now 1200 motors per month.
Copyright © 2025 AMBER Engineering Enterprise. All Rights Reserved. Developed & Maintained by The Pioneer Tech.
