Single Phase AC Brake Motors Manufacture

Product Details

Range:

0.37 to 1.5 KW

Frame :

IEC 63 to 112M

Poles :

2 & 4

Mounting :

Foot (B3), Flange (B5), Face (B14) and combinations

Protection :

IP 54

Insulation :

0.09 to 30 KW

Voltage :

415 V, 380 V, 220 V or as per requirement

Frequency :

50 Hz/ 60 Hz or as per requirement

Duty :

Enclosure :

TEFC

Ambient Temperature:

50°C

Temperature rise:

Class ‘B’ (80ºC)

Bearings :

SKF Double Sealed Ball Bearings

Service Factor :

1 to 1.15

Housing Body :

Cast Iron

Fill This Form to Connect

Single Phase AC Brake Motors Manufacture

Single phase AC Brake motors offered by Amber consist of AC Electromagnetic Fail Safe Brake Unit mounted on the non-drive end of the motor and coupled directly to the shaft of the motor. Amber Single phase DC Brake motors are available in all the three types (PSC, CSIR and CSCR) of single phase motors.The brake in Single phase AC Fail Safe brake motors will apply whenever the power to the brake is cut off.

These motors are availed with or without cooling fan based on the application and requirement. Application of AC Three phase brake motors are in lifts, hoists and other applications where the frequency of switching the brake On-Off is very low. The major care to take while operating AC Fail Safe Brake motors is to check that power to motor and brake are cut off simultaneously otherwise the motor or brake may get damaged.

Product Specification

The primary goals of the Total Quality Management (TQM) project are to enhance product quality, reduce defects, and foster a culture of continuous improvement.

Insulation : F Class
Voltage :230 V, 110 V or as per requirement
Frequency :50 Hz/ 60 Hz or as per requirement
Duty :S1 & S8
Enclosure : TENV & TEFC.
Houding Body : Cast Iron
Brake Torque : Upto 65 Nm

Aluminium Enclosure

Range : 0.37 to 1.5 KW
Frame : IEC 90S to 100L
Poles : 2 & 4
Mounting : Foot (B3), Flange (B5), Face (B14) and combinations
protection : IP 55
Insulation : F Class
Voltage :415 V, 380 V, 220 V or as per requirement
Frequency :50 Hz/ 60 Hz or as per requirement
Duty :S1
Enclosure :TEFC
Ambient Temperature:50°C
Temperature rise:Class ‘B’ (80ºC)
Bearings :SKF Double Sealed Ball Bearings
Standard :1 to 1.05

The problem

The project addresses inconsistencies in product quality, inefficiencies in production processes.